Followers

Thursday, September 10, 2026

VLE Data Calculator: n-Heptane / n-Octane System

VLE Data Calculator: n-Heptane / n-Octane System

VLE Data Calculator: n-Heptane / n-Octane System

Author: Duran Flores Sandra Date: September 5, 2026

Instructions

This application automates Vapor-Liquid Equilibrium (VLE) calculations for a binary mixture of n-heptane (B) and n-octane (A) using high-density interpolated experimental data.

Total System Pressure: $P_{\text{total}} = 760 \text{ mmHg}$

Select any known parameter ($T$, $x_b$, or $y_b$), enter its value within the valid range, and click Calculate to evaluate the remaining equilibrium properties.

Mathematical Foundations

The equilibrium mole fractions are computed from vapor pressure data via Raoult's Law:

$$x_b = \frac{P_{\text{total}} - P_A^{\text{sat}}}{P_B^{\text{sat}} - P_A^{\text{sat}}}$$

$$y_b = \frac{x_b \cdot P_B^{\text{sat}}}{P_{\text{total}}}$$

Interpolation over fine sub-intervals ($\Delta T = 0.01 \text{ °C}$) guarantees numerical consistency and bi-directional accuracy across all state variables.

Equilibrium State Results

System Temperature ($T$)
-
°C
Liquid Mole Fraction ($x_b$)
-
mol n-heptane / mol
Vapor Mole Fraction ($y_b$)
-
mol n-heptane / mol

Weight Fraction to Mole Fraction Converter

Weight Fraction to Mole Fraction Converter

Created by: Sabine Amparan Melendez | Date: September 8, 2026
Instructions:
  1. Click on any element in the Interactive Periodic Table to inspect its properties or insert it directly into your active chemical component card.
  2. Construct molecules by adding element rows and entering stoichiometric atom counts.
  3. Provide the Weight Fraction ($w_i$) for each component (total sum must equal 1.0).
  4. Click Calculate Mole Fractions for automated conversion.
Interactive Periodic Table Click an element to add it to the active component card
Selected Element: None Atomic Number (Z): - Symbol: - Standard Atomic Weight: - g/mol
Mathematical Formulation:

Molecular weight ($M_i$) of component $i$ composed of stoichiometric coefficients ($n_j$) and atomic weights ($A_j$):

$$M_i = \sum_{j} (n_j \cdot A_j)$$

The mole fraction ($x_i$) from weight fractions ($w_i$) in an $N$-component mixture:

$$x_i = \frac{\frac{w_i}{M_i}}{\sum_{k=1}^{N} \frac{w_k}{M_k}}$$

Calculation Results

Component Formula Mol. Weight ($g/mol$) Weight Fraction ($w_i$) Mole Fraction ($x_i$)

Raoult's law mole fraction calculator

Raoult's Law Mole Fraction Calculator

Created by: Álvarez Contreras

Creation date: September 4, 2026

Description

This application calculates the liquid mole fractions \(x_1\) and \(x_2\), and the vapor mole fractions \(y_1\) and \(y_2\), for an ideal binary mixture.

Instructions

  1. Enter the names of the two species.
  2. Select the pressure unit.
  3. Enter the total system pressure.
  4. Enter the vapor pressure of each species.
  5. Use the same unit for all pressure values.
  6. Press the Calculate button.

Equations

\[P=x_1P_1^{sat}+x_2P_2^{sat}\] \[x_1=\frac{P-P_2^{sat}}{P_1^{sat}-P_2^{sat}}\] \[x_2=1-x_1\] \[y_1=\frac{x_1P_1^{sat}}{P}\] \[y_2=\frac{x_2P_2^{sat}}{P}\]

Input Data

Species 1 Species 2 Pressure Unit
Total Pressure \(P\) Vapor Pressure \(P_1^{sat}\) Vapor Pressure \(P_2^{sat}\)

Results

Phase Species 1 Species 2 Sum
Liquid mole fraction \(x\) - - -
Vapor mole fraction \(y\) - - -

Important: This calculator assumes an ideal binary liquid mixture and an ideal vapor phase.

Schedule 40 commercial steel pipe geometric data

Schedule 40 Commercial Steel Pipe Geometry

Author: Javier Novo Date: September 2026 Reference: Applied Fluid Mechanics (R. Mott)

📖 User Instructions

1. Select the desired Nominal Diameter (ND) from the dropdown menu.

2. The tool will automatically retrieve and calculate geometric properties in both British (Imperial) and MKS (SI) units.

3. Review the cross-section diagram and LaTeX equations for verification and homework documentation.

📊 Geometrical Data

British / Imperial Units

PropertyValue (in)Value (ft)
Outside Diameter (Do)--
Inside Diameter (Di)--
Wall Thickness (t)--
Flow Area (A)--

MKS / SI Units

PropertyValue (mm)Value (m)
Outside Diameter (Do)--
Inside Diameter (Di)--
Wall Thickness (t)--
Flow Area (A)--

📐 Pipe Cross-Section Sketch

🧮 Governing Equations

Wall Thickness relationship:

$$t = \frac{D_o - D_i}{2}$$

Cross-sectional Flow Area:

$$A = \frac{\pi}{4} D_i^2$$

Schedule 80 steel pipe data finder based on the ND

Schedule 80 Steel Pipe Data Finder

Prepared by Luis Mario Chávez Jurado

Date completed: September 6, 2026


Please select the nominal diameter (in) you want to look up from the buttons below.

Nominal diameter (in):

Formulas used

— flow area from the internal diameter
— flow rate from velocity and area
Minimum and maximum allowable velocities, and their corresponding minimum and maximum flow rates, are based on the "General Service" velocity criteria table from Crane Technical Paper No. 410, Flow of Fluids Through Valves, Fittings, and Pipe.

Ideal gas mole calculator - SI

Ideal Gas Mole Calculator Created by: Nayomi Alvarez Contreras Date: November 15, 2026 Desc...