Followers

Showing posts with label VLE data. Show all posts
Showing posts with label VLE data. Show all posts

Thursday, September 10, 2026

Ethanol-Water VLE calculator

Ethanol-Water VLE Calculator - Enriquez Palma

Ethanol-Water VLE Calculator

Student: Enriquez Palma

Creation date: September 8, 2026

System: Ethanol (component 1) + Water (component 2)

Total pressure: 1 atm = 101.325 kPa = 760 mmHg

Purpose

This app calculates the missing two equilibrium variables when one of the following is supplied: liquid ethanol mole fraction x, vapor ethanol mole fraction y, or temperature T.

The equilibrium data are represented with a dense table using a step of 0.001 in x, obtained by linear interpolation between the tabulated ethanol-water VLE data at 1 atm.

How to use

  1. Select whether the known variable is x, y, or T.
  2. Enter its value in the corresponding field.
  3. Press Calculate.
  4. The program reports the missing equilibrium variables.

Mole fractions are dimensionless. Temperature must be entered in °C.

Calculation


Mathematical basis

The app uses the VLE relationship represented by the experimental ethanol-water equilibrium data:

\(T=f(x),\qquad y=g(x)\)

For a supplied x, interpolation directly provides y and T. For a supplied y, the program searches the dense table for the corresponding x and T. For a supplied T, the program searches for all crossings of the temperature curve and reports every equilibrium solution when the ethanol-water azeotrope produces more than one composition at the same temperature.

Reference data

The base data correspond to ethanol-water VLE at 1 atm, with x and y as mole fractions of ethanol. The original tabulated points are shown below; the calculator internally uses a 0.001 x-step interpolation.

x ethanoly ethanolT (°C)

Reference: Wankat, Separation Process Engineering, ethanol-water VLE data at 1 atm (Table 2-1), as reproduced in public technical sources.

VLE Data Calculator: n-Heptane / n-Octane System

VLE Data Calculator: n-Heptane / n-Octane System

VLE Data Calculator: n-Heptane / n-Octane System

Author: Duran Flores Sandra Date: September 5, 2026

Instructions

This application automates Vapor-Liquid Equilibrium (VLE) calculations for a binary mixture of n-heptane (B) and n-octane (A) using high-density interpolated experimental data.

Total System Pressure: $P_{\text{total}} = 760 \text{ mmHg}$

Select any known parameter ($T$, $x_b$, or $y_b$), enter its value within the valid range, and click Calculate to evaluate the remaining equilibrium properties.

Mathematical Foundations

The equilibrium mole fractions are computed from vapor pressure data via Raoult's Law:

$$x_b = \frac{P_{\text{total}} - P_A^{\text{sat}}}{P_B^{\text{sat}} - P_A^{\text{sat}}}$$

$$y_b = \frac{x_b \cdot P_B^{\text{sat}}}{P_{\text{total}}}$$

Interpolation over fine sub-intervals ($\Delta T = 0.01 \text{ °C}$) guarantees numerical consistency and bi-directional accuracy across all state variables.

Equilibrium State Results

System Temperature ($T$)
-
°C
Liquid Mole Fraction ($x_b$)
-
mol n-heptane / mol
Vapor Mole Fraction ($y_b$)
-
mol n-heptane / mol

Ideal gas mole calculator - SI

Ideal Gas Mole Calculator Created by: Nayomi Alvarez Contreras Date: November 15, 2026 Desc...