Reynolds Number Calculator: Newtonian vs. Bingham Plastic Fluid
Author: Cesar Caballero Medrano | Date of creation: October 22, 2026
What this app does: it calculates and compares the Reynolds number of a Newtonian fluid and of a Bingham plastic fluid flowing in a circular pipe, and tells you whether each flow is laminar or turbulent. Inputs can be entered in SI or British units.
- Select the unit system (SI or British). If you change it, the values already typed are converted automatically.
- Enter the pipe inside diameter, the fluid density and the flow, either as average velocity or as volumetric flow rate.
- Enter the viscosity of the Newtonian fluid, and the plastic viscosity and yield stress of the Bingham plastic.
- Press Calculate. The app shows both Reynolds numbers side by side, the Hedström number, the flow regime of each fluid and a comparison.
Equations used
Newtonian fluid
$$ Re_N = \frac{\rho \, v \, D}{\mu} $$Bingham plastic fluid (Bingham Reynolds number, based on the plastic viscosity)
$$ Re_B = \frac{\rho \, v \, D}{\mu_p} \qquad\qquad He = \frac{\rho \, \tau_y \, D^2}{\mu_p^2} $$Average velocity from volumetric flow rate
$$ v = \frac{4\,Q}{\pi D^2} $$Critical Reynolds number for a Bingham plastic (Hanks). First solve for $\phi_c = \tau_y/\tau_w$ at the transition:
$$ \frac{He}{16800} = \frac{\phi_c}{(1-\phi_c)^3} \qquad\qquad Re_{B,c} = \frac{He}{8\,\phi_c}\left(1 - \frac{4}{3}\phi_c + \frac{\phi_c^{4}}{3}\right) $$Where: $\rho$ = density, $v$ = average velocity, $D$ = inside diameter, $Q$ = volumetric flow rate, $\mu$ = Newtonian viscosity, $\mu_p$ = plastic viscosity, $\tau_y$ = yield stress, $\tau_w$ = wall shear stress. For the Newtonian fluid, the flow is laminar for $Re_N < 2100$ and turbulent for $Re_N > 4000$. For the Bingham plastic the flow is laminar when $Re_B < Re_{B,c}$.
Sketch of the two fluid models
Input data
Results
Note: results are for educational purposes. The Hanks criterion is valid for Bingham plastics in circular pipes.
No comments:
Post a Comment