Developed by Noe Chavez Vega — Created on October 22, 2026 — Chemical Engineering Apps, Fluid Mechanics.
Fanning Friction Factor Calculator for Power-Law Fluids
This tool computes the Fanning friction factor $f_F$ for a power-law (Ostwald–de Waele) fluid flowing in a smooth circular pipe. Enter your data in either SI or British (US customary) units; the results are always shown in both systems. Results update automatically.
- Select the unit system you want to type your data in (the fields are converted automatically if you switch).
- Choose whether you know the mean velocity or the volumetric flow rate.
- Enter the pipe diameter, fluid density, consistency index $m$, and flow behavior index $n$.
- Read the Reynolds number, flow regime, and friction factor in the results table.
1. Input data
2. Results
| Quantity | SI | British |
|---|---|---|
| Diameter, $D$ | m | ft |
| Mean velocity, $V$ | m/s | ft/s |
| Flow rate, $Q$ | m³/s | ft³/s |
| Density, $\rho$ | kg/m³ | lbm/ft³ |
| Consistency index, $m$ | Pa·sn | lbf·sn/ft² |
| Reynolds number, $N_{Re}$ | ||
| Critical Reynolds number, $N_{Re,c}$ | ||
| Fanning friction factor, $f_F$ | ||
3. Equations used
The equations follow the hydraulic formulation for power-law fluids compiled in the post "Hydraulic equations for non Newtonian fluids" (Chem Eng stuff blog), based on Dodge & Metzner (1959) and Darby et al. (1992).
Reynolds number for a power-law fluid (Dodge & Metzner), written in a consistent unit system:
$$N_{Re}=\frac{(4n)^{n}\,D^{\,n}\,V^{\,2-n}\,\rho}{m\,(3n+1)^{n}\,8^{\,n-1}}$$Critical Reynolds number (Darby et al.):
$$N_{Re,c}=2100+875\,(1-n)$$Laminar flow ($N_{Re}\le N_{Re,c}$):
$$f_{F}=\frac{16}{N_{Re}}$$Transition region ($N_{Re,c}<N_{Re}\le 4000$):
$$f_{F}=1.79\times10^{-4}\,e^{-5.24\,n}\,N_{Re}^{\,0.414+0.757\,n}$$Turbulent flow ($4000<N_{Re}<10^{5}$):
$$f_{F}=\frac{0.0682\,n^{-1/2}}{N_{Re}^{\,1/(1.87+2.39\,n)}}$$Here $f_F$ is the Fanning friction factor (the symbol $f_{FF}$ is used for it in the source post).
Unit conversions: 1 ft = 0.3048 m; 1 lbm/ft³ = 16.01846 kg/m³; 1 lbf·sn/ft² = 47.88026 Pa·sn. Internally the calculation is done in SI, which makes the factor $g_c$ unnecessary.
4. Assumptions and limitations
- Steady, fully developed, isothermal flow of a time-independent power-law fluid, $\tau = m\dot{\gamma}^{\,n}$, in a smooth, straight, circular pipe.
- The turbulent correlation is intended for $4000<N_{Re}<10^{5}$. Outside that range (and in the transition region) results are approximate. The transition and turbulent equations are separate empirical fits, so $f_F$ may show a small jump at $N_{Re}=4000$.
- Pipe roughness, entrance effects, fittings and elevation changes are not considered.
References
- Pérez Reyes, I. (2025). Hydraulic equations for non newtonian fluids. Chem Eng stuff. https://chemicalengstuff.blogspot.com/2025/04/hydraulic-equations-for-non-newtonian.html
- Darby, R., Mun, R., & Boger, D. V. (1992). Predict friction loss in slurry pipes. Chemical Engineering, 99(9), 116–119.
- Dodge, D. W., & Metzner, A. B. (1959). Turbulent flow of non-Newtonian systems. AIChE Journal, 5(2), 189–204.
- Bird, R. B., Armstrong, R. C., & Hassager, O. (1987). Dynamics of Polymeric Liquids, Vol. 1. Wiley.
No comments:
Post a Comment